84
7. Go to “Disable if idle for (minutes)” and select a value
from the drop-down list:
5
10
20
30
60.
8. To pair with an A2DP audio device, you must enable the
connection by pressing the “Enable?” option.
Upon completing the connection it will be necessary to
enter a Bluetooth Pinto pair with the keyboard, you can
enter the PIN and immediately reproduce it on the
keyboard being connected (pairing is performed during
first connection; no PIN is required for further
connections).
Once this is done, you can use the keyboard to enter text
and control the device with cursor arrows.
To Next Page
Loading...
