Point Grey Research Grasshopper Technical Reference
Introduction
Revised 26-Nov-10
Copyright (c) 2010 Point Grey Research Inc.
13
If reducing heat is a concern, users can use a cooling fan to set up a positive air flow around the
camera, taking into consideration the following precautions:
• Mount the camera on a heat sink, such as a camera mounting bracket, made out of a
heat-conductive material like aluminum.
• Make sure the flow of heat from the camera case to the bracket is not blocked by a non-
conductive material like plastic.
• Make sure the camera has enough open space around it to facilitate the free flow of air.
1.8. Camera Accessories
Accessories such as tripod mounts and lens holders are available from PGR – contact our Sales
team at sales@ptgrey.com
for additional information. Links to FireWire/IEEE-1394 and digital
camera accessories can be found in the following knowledge base article:
KB Article 131: www.ptgrey.com/support/kb/index.asp?a=4&q=131
.
To Next Page
Loading...
