Polaris 2009 Sportsman XP 850 - Adc; 4 X4; 2 X4 Switch; Off; Run Lh Switch

12.10
ELECTRICAL
ADC / 4X4 / 2X4 SWITCH
Function Test
Use a multimeter to test for continuity between the 2 sets of
switch outputs (ADC / 4x4).
NOTE: Selecting 2x4 drive mode does not complete
any circuits. All circuits should be OL when 2x4 is
selected.
Move the drive selector switch to each drive mode, and then test
for continuity.
If any of the tests fail, replace the RH throttle / switch assembly.
OFF / RUN LH SWITCH
Function Test
Use a multimeter to test for continuity when the LH switch is
moved to the RUN position.
Move the switch to the RUN position and test.
If the test fails, replace the LH control assembly.
ADC / AWD / 2x4 Switch Test
345
4x4 ADC
4x4 (AWD)
2x4
3
4
5
Off / Run Switch Test
F (Left Connector) C (Right Connector)
OFF
RUN
FC
PartShark.com
877-999-5686