4.4
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
This module kit contains the necessary cables and
hardware to communicate between the vehicle ECU and
the Digital Wrench® diagnostic software. Polaris dealers
can also order the following kit components separately:
SmartLink Module PU-47468, Vehicle Interface Cable
PU-47469 and PC Interface Cable PU-47470. This
module kit is used on all 8 pin connector-based Polaris
EFI systems. This kit is available to Polaris dealers
through our tool supplier Bosch Automotive Service
Solutions: 1-800-345-2233 or http://polaris. service-
solutions.com.
Digital Wrench® - Diagnostic Connector
The diagnostic connector is located under the passenger
seat connected to a sealed plug. To access the
diagnostic connector on 2 seat models with a center
console the center console must be removed.
Digital Wrench® - Download Website
Located at: www.polaris.diagsys.com
Download Digital Wrench® Updates:
NOTE
For the most recent information on Digital Wrench®
software and update downloads please visit the
website: www.polaris.diagsys.com
FUEL SYSTEM - GENERAL
To Next Page
Loading...
Need help?
General
