4.48
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
Reprogramming (Reflash) Procedure:
If you are not familiar with the reprogramming process,
review the “Reprogramming (Reflash) Tips” before you
begin. Follow the on-screen instructions as you progress
through the steps. If you encounter a problem, always
check the On-Line help for current tips and information.
1. Verify the most current update has been downloaded
and loaded into Digital Wrench®. See “Digital
Wrench® Version and Update ID”, page 4.44
2. Connect SmartLink Module cables to PC and
vehicle. See “Digital Wrench® - Diagnostic
Connector”, page 4.43
3. Open the Digital Wrench® program.
4. Select the model year, product line and vehicle
description by selecting the “Change Vehicle Type”
icon.
5. Select the “Special Tests” icon.
6. Select “Engine Controller Reprogramming”.
7. Select the file you want to load into the ECU then
click the “Continue” icon to proceed to the Integrity
Check and obtain a Request Code.
FUEL SYSTEM - GENERAL
To Next Page
Loading...
Need help?
General
