8.16
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
9. Remove the shift shaft (K), detent pawl (L) and the
shift sector gears (M and N).
NOTE
Note the timing marks on the shift gears (M and N) for
reassembly purposes.
10. Remove the O-rings (P) from each shaft and discard.
Use new O-rings upon assembly.
11. Remove all the transmission case bolts. Using
suitable pry bars, remove the cover using the
designated pry points (indicated by the black arrows
in the illustration below).
CAUTION
Do not pry on case sealing surfaces.Use only the
designated pry pointson the transmission.
12. Lift up on the shift shaft rail (Q) and move the rail
assembly rearward to allow the shift fork pins to be
removed from the shift drum (R). Remove the shift
drum (R) from the transmission housing.
13. Remove the shift shaft rail (Q) and shift forks from
the transmission housing as an assembly.
TRANSMISSION
To Next Page
Loading...
