EasyManuals Logo

Polaris RANGER CREW 900 EPS 2014 User Manual

Polaris RANGER CREW 900 EPS 2014
447 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
2
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
2.35
6. Inspect electrodes for wear and carbon buildup. Look
for a sharp outer edge with no rounding or erosion of
the electrodes.
7. Clean with electrical contact cleaner or a glass bead
spark plug cleaner only. CAUTION: A wire brush or
coated abrasive should not be used.
8. Measure gap with a wire gauge. Adjust gap if
necessary by carefully bending the side electrode.
9. If necessary, replace spark plug with proper type.
CAUTION: Severe engine damage may occur if the
incorrect spark plug is used.
Recommended Spark Plugs:2013 Models: Champion
RG4YCX2014 Models: Champion XG4YCX
10. Apply anti-seize compound to the spark plug
threads.
11. Install spark plugs and torque to specification.
TORQUE
Spark Plug:7 ft-lbs. (10 Nm)
12. Install the plug caps to the appropriate cylinder by
referencing the MAG and PTO spark plug wire
decals (B). Ensure wires are pushed down all the
way so they engage onto the spark plugs.
MAINTENANCE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RANGER CREW 900 EPS 2014 and is the answer not in the manual?

Polaris RANGER CREW 900 EPS 2014 Specifications

General IconGeneral
BrandPolaris
ModelRANGER CREW 900 EPS 2014
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals