50
Fig. 4Fig. 3
Installazione antenna
Thesupplied high gainantenna pro-
vides high performance at the entire
VHF / UHF frequency range of the
transceiver.
To installthe suppliedantenna, hold
the bottom end of the antenna, then
screw it onto the connector on the
transceiver until it is snug, pic. 3.
Do not over-tighten by use of ex-
treme force.
To uninstall the antenna, hold the
bottom end of it and turn it counter
clockwisetoremoveit,pic.4.
Notes
• Never transmit without having an
antenna connected.
• When installing the supplied an-
tenna, never hold the upper part
of the antenna while screwing it
onto the connector on the trans-
ceiver. Or you may snap the an-
tenna.