POLMAR DB-5 - Working Modes; Frequency Mode (VFO); Frequency-Channel Mode (MR); Channel Mode (CH)

59
WORKING MODE
Frequency Mode (VFO)
Under this mode, you can use / keytochangethefrequencyorinputthe-
frequencybykeypaddirectlyandstorechannels.
Frequency-Channel Mode (MR)
When you have stored a memory channel at least and under VFO mode, press
keytoenterMRmode.
ThefrequencywillbeindicatedonthedisplayandthechannelNo.willbeindi-
cated at the right side. If the transceiver display name option is ON and channel
name edited, it will show the name of the channel.
Channel Mode (CH)
Whenyouhavestoredamemorychannelatleast,itcanworkinCHmode.Chan-
nel No.will be indicated on the display.
FMW Radio Mode
TheDB-5providesfrequency88.00-108.00MHzFMWradio.
Under this mode, you can choose FMW frequency you need directly. Scan fre-
quencyrange and store your favorite channels. Press to enter and exit FMW
radio mode.