POLMAR DB-5 - Voice Prompt and Power-on Settings; Repeater Shift Settings

73
17 Voice Prompt (VOICE---MENU 19)
Functions:enable/disablevoiceprompt.
EnterMenu19thtosetVOICE.Default:ON.
18 Power-on Display setting (OPN.SET&VLT&PON.MSG---MENU
20&21&22)
Functions: choose power-on display mode and edit power-on message.
EnterMenu20thtosetOPN.SET.Default:OFF.
OFF: display model version.
DC: battery power voltage.
MSG: power-on message.
EnterMenu21sttocheckbatteryvoltage.
EnterMenu22ndtoeditpower-onmessage.
Using / , to select character; / to switch cursor position.
19 Repeater Shift setting (OFFSET&S-D---MENU 23&28)
Functions: repeater stations, usually located on mountaintops or other high loca-
tions, provide a dramatic extension of the communication range for low-powered
hand-held or mobile transceivers.
Under VFO mode, you can set the magnitude and direction of the repeater shift.
EnterMenu23rdtosetmagnitudeoftherepeatershift.
Availablevalues:0.00~99.95MHz.
EnterMenu28thtosettherepeatershiftdirection.Default:OFF.