POLMAR DB-5 - Wire Cloning; Cloning Procedure

81
Repeat this operation, you can delete all memory channel, 25 in
maximum.
Wire Clone
Prepare2setsofDB-5,1pcsspecicwiredcloningcable.
Master radio (sending messages when in wired cloning).
Deputy radio (receiving and storing messages when in wired cloning).
Steps of wired clone.
1. Thedeputyradionormallypoweron.Connectmasteranddeputyonewith
the wired cloning cable.
2. PressPTTand toturnonthemasterradio,enterthewiredclonestate.The
“Clone”willbeheard,LCDdisplays“CLONE”.
3. Press[MONI]keyofthemasterradiotostartwiredclone.Dur-
ingcloning,bothradiosdisplay“PROGRAM/XX%”,themaster
oneblinksredwhiledeputyoneblinksgreen.
4. If cloning succeeds, the master one displays “PROGRAM/
100%” and returns to clonepreparationstate, whiledeputy
one powers on automatically.
5. Ifcloningfailed,materonedisplays“ERROR”orkeeps“PRO-
GRAM/ XX%” and blinks red all the time, while deputy one
powers on automatically.