Poly G7500

Poly G7500 | Room Preparation Guide 3.3.0
Poly, Inc. 15
7.6 m (25 ft)
2457-23216-002
Yes
3 m (10 ft)
2457-28978-001
Yes
15.24 m (50 ft)
2457-29051-001
Yes
Polycom EagleEye Director II RCA Audio Breakout Cable
Use this cable to connect a G7500 system to the Polycom EagleEye Director II camera and the room
audio playback system. It’s dual male RCA connectors (used with the EagleEye Director II dual stereo
adapter for the G7500 codec) a 3.5 mm male connector (for the EagleEye Director II) and dual female
RCA connectors (for the room audio playback system).
EagleEye Director II RCA Audio Breakout Cable
Length
Part Number
RoHS Compliant
3 m (9.8 ft)
2457-69476-001
Yes
Polycom EagleEye Director II Dual Stereo Audio Adapter
Use this 3.5 mm adapter with a Polycom EagleEye Director II RCA Audio Breakout Cable (part number
2457-69476-001) to convert the 3.5 mm line out connection on a G7500 system to RCA.
EagleEye Director II Dual Stereo Audio Adapter
Length
Part Number
RoHS Compliant
—
1517-09350-001
Yes
Serial Cables
This section includes information about the serial cables you can use with your G7500 system.
Polycom Serial Cable
Use this cable to connect a G7500 system to a serial device. It’s 8-pin mini-DIN to DB-9.
Note:
The 8-pin mini-DIN RS232 connection is wired per Poly RS-232 and does not follow VISCA pinout
convention. Don’t try to use a cable meant to support VISCA in this application as it doesn’t work
correctly.
Don’t use this adapter directly connected to multi-purpose AMX serial ports. AMX systems support
both RS-232 AND RS-422. Therefore, for the most reliable RS-232 support with this adapter, use an
additional null modern cross-over cable in-line that only carries pins 2, 3, and 5, with pins 2 and 3
crossed.