Poly G7500

Poly, Inc.
3
Introduction
This guide can help you plan and prepare a video-conferencing room before installing the Poly G7500
system. The user of this guide should have:
● Familiarity with video conferencing technology.
● Prior knowledge and experience with audio/video (AV) cable installation and management.
Installation Prerequisites
Before installers arrive onsite, install any cabling inside floors, walls, and ceilings/installation of any
ceiling/wall mounted brackets used to support Poly and non-Poly equipment. This includes displays,
projectors, microphones, speakers, projection screens, and cameras. If you’re using an installer, they can
install the system, test, and show the system working in a temporary position leaving you to then unplug
and route cables as you wish.
Room Layout Examples
This section provides information about how to set up a room for video conferencing using the Poly
G7500 systems and other Poly products.
Layout Diagrams
Use the following diagrams as examples for setting up a conference room with Poly G7500 systems. Poly
recommends that you contract an experienced contractor to ensure all the components operate as a
single cohesive system.