Poly Studio X70 Administrator's Guide

● Logs
● User-installed PKI certificates
● Local directory entries
● Call detail record (CDR)
1. Disconnect the power supply to turn off the system.
2. Do one of the following:
● On the front of the G7500, insert a straightened paper clip through the factory restore
pinhole.
● On the bottom of the Studio X70, insert a straightened paper clip through the factory restore
pinhole.
● On the side of the Studio X50, insert a straightened paper clip through the factory restore
pinhole.
● On the bottom of the Studio X30, insert a straightened paper clip through the factory restore
pinhole.
3. While continuing to hold the restore button, reconnect the power supply to turn the system on.
4. When the system LED indicator light turns amber, stop pressing the restore button.
You can only view the restore progress on a display connected to the secondary monitor HDMI
output port.
114
Chapter 14System Maintenance

Poly Studio X70 Specifications

General

Control	Touch interface, remote control
Operating System	Poly VideoOS
Product Type	Video conferencing system
Video Standards	H.264, H.265
Bluetooth	Bluetooth 5.0
Frame Rate	30 fps
Memory	4 GB RAM
Audio	Stereo speakers, microphone arrays
Connectivity	USB-C, Bluetooth, Wi-Fi
Video Output	HDMI
Audio Input	Microphone array
Wireless Protocol	Wi-Fi 802.11a/b/g/n/ac
Video Resolution	Up to 4K
Zoom	5x digital zoom
Interfaces	HDMI, Ethernet
Network Protocol	TCP/IP, DHCP
Security Protocols	802.1x authentication
Management	Poly Lens
Video Conferencing Support	Zoom, Microsoft Teams
Storage	16GB eMMC
Weight	4.4 kg (9.7 lbs)