Poly TC8 User Manual

Turn Your Camera On or Off
You can turn your camera on to show local video or turn your camera off to hide your local video.
1. If you’re out of a call, select Menu .
2. Select On or Off to show or hide your video.
Turn Camera Tracking On or Off
When camera tracking is on, the camera automatically frames the group of people in the room or the
current speaker (depending on your camera and how your system is configured).
NOTE: If you mute your local microphone, the system disables speaker tracking.
1. Select Camera .
2. Toggle Camera Tracking on ( ) or off ( ).
Selecting the Primary Camera
If you have more than one camera attached to the system, you can select the primary camera in or
out of a call.
Camera Priority
When you connect or disconnect a camera, camera priority determines the primary or active camera.
The system observes the following camera type priority:
1. Embedded camera
2. HDCI camera
3. USB camera
4. HDMI source set to display as people
Select the Primary Camera Using the Poly TC8
When you attach multiple cameras to the system, you can select the primary camera from the TC8
Camera Controls screen.
1. Select Camera .
2. From the camera drop-down menu, select a camera.
The selected camera becomes the primary camera.
Using Camera Presets
If your camera supports presets, you can save up to 10 camera positions. Camera presets are stored
camera positions that let you quickly point a camera at predefined locations in a room.
20
Chapter 4Using the Poly TC8 in Poly Video Mode

Poly TC8 Specifications

General

Display	8-inch touch screen
Resolution	1280 x 800
Connectivity	Wi-Fi
Ports	1 x USB-C, 1 x 3.5mm Audio Jack
Power	IEEE 802.3af PoE
Operating System	Android