Integrating the SoundPoint IP 7000 Conference Phone with a Polycom HDX System
15
e Scroll down to IP Gateway, then press the EDIT soft key.
f Enter the IP gateway address, then press the OK soft key.
g Scroll down to DNS Server, then press the EDIT soft key.
h Enter the DNS server address, then press the OK soft key.
i Scroll down to DNS Domain, then press the EDIT soft key.
j Enter the DNS domain name, then press the OK soft key.
6. Scroll down to Server Menu, then press the SELECT soft key.
7. Select the Server Type that is appropriate to your environment.
For example, if you are using an FTP server, verify that the Server Type is
set to FTP. To change it to FTP from another value, press the EDIT soft
key, use the right arrow key to select FTP, and then press the OK soft key.
8. Scroll down to Server Address, then press the EDIT soft key.
9. Enter the IP address of the computer that is running the server, then press
the OK soft key.
If your computer is running the FTP server, then enter your computer’s IP
address.
10. Scroll down to Server User, then press the EDIT soft key.
11. Enter the user name, then press the OK soft key.
This is the user name you created in step 3 in Setting Up a Provisioning
Server on page 13.
12. Scroll down to Server Password, then press the EDIT soft key.
This is the password you created in step 3 in Setting Up a Provisioning
Server on page 13.
13. Press the EXIT soft key twice.
14. Scroll down to Save & Reboot
, then press the SELECT soft key.
The phone will reboot.
The following messages will appear on the screen:
— Waiting for network to initialize
— Downloading new application
— Checking new application
— Saving new application
— Checking new application
— Loading application
— Running <application filename>
— Welcome
The upgrade process will take some time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
