Polycom SoundStructure C8 User Manual

Using Events, Logic, And IR
9 - 27
In this event, every time the PTT button is closed, the clink_mute parameter
will be toggled.
To mute the microphones based on clink_mute, another event is required that
will map clink_mute to the mute of the “Mics” group.
The Clink_mute to Mics Mute event take the clink_mute state of device 1 and
maps that value to the mute state of the Mics group. Now whenever the PTT
microphone button is pushed, the clink_mute parameter will toggle and any
change in the clink_mute parameter will be mapped directly to the mute state
of “Mics” causing all microphones in the “Mics” group to be muted.

Polycom SoundStructure C8 Specifications

General

Audio Inputs	8
Audio Outputs	8
Network Connectivity	Ethernet
Acoustic Echo Cancellation	Yes
Noise Reduction	Yes
Microphone Inputs	8
Line Outputs	8
AEC Channels	8
USB Ports	1
Sample Rate	48 kHz
Bit Depth	24-bit
Frequency Response	20 Hz - 20 kHz
Total Harmonic Distortion	< 0.01%
Power Supply	100-240V AC
Line Inputs	8
Signal Processing	DSP-based