Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
12 - 46
These areas display as shown in the following figure.
VoIP Network Settings
Select either Automatic Configuration (DHCP) or Manual Configuration for
configuring the IP address of the SoundStructure VoIP Interface as described
in the following table.
Name Possible Values Description
Address Mode Automatic Configuration
(DHCP) (default)
The SoundStructure VoIP Interface expects to receive
an IP address from the network DHCP server. If you
select automatic configuration then the manual fields
are grayed out and are not accessible.
Manual configuration You will need to manually set the SoundStructure VoIP
Interface’s IP address including the IP address,
netmask, gateway, and optional DNS servers.
To Next Page
Loading...
Need help?
General
