The SoundStructure VoIP Interface
12 - 59
7. If you select Yes, then you will be presented with a license agreement to
accept or reject. To continue, select Accept.
8. Finally, the system will begin the upgrade process by rebooting the
phone and beginning the firmware file transfer. Press Ok to continue.
9. Once the system has completed, confirm the SoundStructure VoIP
Interface has the desired version of firmware from the Wiring page.
To clear the Software Upgrade Server, click the Clear Upgrade Server as
shown in the following figure.
Once the software has been updated via the Web Configuration Utility, the
standard provisioning server firmware update process will not work until
the Software Upgrade Server has been cleared by clicking Clear Upgrade
Server or the SoundStructure VoIP Interface has been factory reset.
To Next Page
Loading...
Need help?
General
