Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 20
vcgrename <label> <new-label><term>
Each of the command arguments is described below.
<label>
The <label> argument is a user-defined text argument that specifies the name
of the virtual channel group to be renamed. If no virtual channel group exists
with the given label, then the SoundStructure device will respond with an
error message.
<new-label>
The <new-label> argument is a user-defined text argument that specifies the
new name to assign to the virtual channel group. If a virtual channel group or
virtual channel already exists with the same label, then the SoundStructure
device will respond with an error message.
vcgrename Acknowledgements
When a virtual channel group definition command with the vcgrename action
is successfully executed, the SoundStructure device will send an acknowl-
edgement in the same format as the command. The acknowledgement will be
sent to all interfaces.
vcgadd Action
The vcgadd action is a virtual channel group definition command that adds a
virtual channel member to a virtual channel group. Commands with the
vcgadd action have the following syntax.
vcgadd <label> <vcmember><term>
Each of the command arguments is described below.
<label>
The <label> argument is a user-defined text argument that specifies the name
of the virtual channel group to which the new member will be added. If no
virtual channel group exists with the given label, then the SoundStructure
device will respond with an error message.
<vcmember>
The <vcmember> argument is a user-defined text argument that defines the
name of the virtual channel to be added to the virtual channel group. If no vir-
tual channel with the specified name exists, the SoundStructure device will
respond with an error message. If the virtual channel is already a member of
the virtual channel group, the SoundStructure device will respond with an
error message.
To Next Page
Loading...
Need help?
General
