Polycom SoundStructure C8

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 44
phone_auto_answer_en Enable Auto-Answer For Telephony Interface
Description
This parameter enables (1) or disables (0) the auto-answer feature for the tele-
phony interface.
Examples
pstn_auto_hangup_loop_en
✔
pstn_country
✔
pstn_flash_delay_override
✔
pstn_in_gain
✔
pstn_line_voltage
✔
pstn_loop_current
✔
pstn_out_gain
✔
Command Input channel Output channel
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Analog Telephony Input
Virt Chans Mono
Default 0
Event Source No
Command Response Description
set
phone_auto_answer_en
"Phone In" 1
val
phone_auto_answer_en
"Phone In" 1
Sets the phone associated with the virtual channel
"Phone In" to autoanswer when the phone rings. Note
that the phone in virtual channel name must be used, not
the phone output virtual channel name.