Polycom SoundStructure C8 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 138
Description
This parameter gets or sets the value of the analog gpio pin. Writing an input
has no effect and returns the current value of the input. The value for this
parameter is an integer between analog_gpio_min and analog_gpio_max, inclu-
sive. Those parameters control how the analog value of the pin is mapped to
an integer range.
Examples
digital_gpio_held Digital GPIO Pin held Status
Description
This parameter indicates when a digital input pin is held. It is similar in func-
tionality to the ir_key_held parameter. The hold time and repeat time are
specified by the digital_gpio_hold_time and digital_gpio_repeat_time parameters.
When the pin is held for the hold time, a status message will be generated. If
the pin remains held, status messages will be generated with a period equal to
the repeat time.
digital_gpio_hold_time Digital GPIO Pin Hold Time
Command Response Description
get analog_gpio_value
"Analog Logic Pin"
val analog_gpio_value
"Analog Logic Pin" 0
Returns the analog voltage associated with the analog
logic pin "Analog Logic Pin". The logic pin "Analog Logic
Pin" must have been created with a vcdef command.
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read-Only
Phys Chans Digital General Purpose I/O Input
Virt Chans Control
Event Source Yes
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Digital General Purpose I/O Input
Virt Chans Control

Polycom SoundStructure C8 Specifications

General

Brand	Polycom
Model	SoundStructure C8
Category	Conference System
Language	English