Creating Designs with SoundStructure Studio
4 - 7
the file offline, customize settings - including the wiring page as described in
the next chapter if the system has already been cabled, and then upload the set-
tings to the device for final online adjustments.
In this example, the design file will be created offline for offline configuration
and later uploaded to the device.
To find devices on the network, select Send configuration to devices and Sound-
Structure Studio will search for devices on the local LAN as defined by the
Ethernet interface’s subnet mask or the RS-232 interface to find devices. See
Chapter 8 for additional information on uploading and downloading configu-
ration files and Appendix B for how to use the Address Book functionality.
To Next Page
Loading...
Need help?
General
