Using the Basic Features of Your Phone
3 - 9
Dialing Numbers Using the Speakerphone
To dial a number using the speakerphone:
>>
With the handset on-hook, do one of the following:
— Tap the New Call soft key or the Line Key, or press to obtain
a dial tone. Then, enter the phone number.
or
— Enter the phone number, and then tap the Dial soft key or the
Line Key, or press .
Dialing URLs or IP Addresses Using the Speakerphone
To dial a URL or IP address using the speakerphone:
1. Tap the New Call soft key or the Line Key, or press .
2. Tap the URL soft key.
3. Enter the URL or IP address. (See Entering Data and Editing Fields on
page 1-25.)
4. Tap the Send soft key.
Placing Calls Using the Headset
Dialing Numbers Using the Headset
To dial a number using the headset:
>>
With the optional headset connected, do one of the following:
— Tap the New Call soft key or the Line Key to obtain a dial tone. Then,
press , and then enter the phone number.
Note
Your system administrator sets up your phone to automatically place the call after
you enter a certain number of digits. If your phone does not automatically place the
call after you enter a phone number, tap the Send soft key.
Note
To permanently enable your headset, see Enabling Headset Memory Mode on
page 2-7.
To Next Page
Loading...
