Polycom VVX 1500 - Placing Calls Using Speed Dial

User Guide for the Polycom VVX 1500 Phone
3 - 10
or
— Enter the phone number, tap the Dial soft key, and then press
.
Dialing URLs or IP Addresses Using the Headset
To dial a URL or IP address using the headset:
1. Tap the New Call soft key or the Line Key to obtain a dial tone.
2. Press .
3. Tap the URL soft key.
4. Enter the URL or IP address. (See Entering Data and Editing Fields on
page 1-25.)
5. Tap the Send soft key.
Placing Calls Using Speed Dial
You can quickly “speed dial” a contact by doing one of the following:
• Tapping the contact’s Speed Dial Key.
Not all contacts have a Speed Dial Key. For information on
Speed Dial Keys, see Managing Speed Dial Keys on page 3-38.
• Accessing the Speed Dial Information screen.
To place a call to a contact using speed dial:
>> Do one of the following:
— Tap the contact’s Speed Dial Key.
Note
Your system administrator sets up your phone to automatically place the call after
you enter a certain number of digits. If your phone does not automatically place the
call after you enter a phone number, tap the Send soft key.
Note
A contact may not have a speed dial number. To find out what a contact’s speed dial
index number is, or to assign or update a speed dial index number, see Updating
Contacts in Your Local Contact Directory on page 2-58.