Polytec PDV-100 - Page 59

iii
Index
laser vibrometer
assembly
3-5
connecting plug 12V 3-4
display 3-3
inch thread, mounting hole 3-5
jack ANALOG OUT 3-4
jack DIGITAL OUT 3-4
key SET 3-3 , 5-2
M5, mounting holes 3-5
M6, mounting holes 3-5
selection key, operating conditions 3-3
selection key, setting parameter 5-2
signal level display 5-2
use the beam shutter 5-1
using the focusing ring 5-1
laser warning labels 1-4
LCD-display 3-3
liquid crystal display 3-3
lithium ion battery 3-2
low pass filter
laser vibrometer, specifications
7-3
select 4-2
M
M5, mounting holes 3-5
M6, mounting holes 3-5
main menu
in the laser vibrometer
5-3
Velo, measurement range 5-3
mains connection
laser vibrometer
3-2
mains connetction
electrical connection
3-7
mains supply
on-bord pulg socket
A-7
maintenance requirements 3-2
measurement principle 2-2
measurement procedure, basics B-1
measurement range
select
4-2
setting Velo 5-3
technical specifications 7-3
measurement signal
generate analog
5-6
generate digital 5-6
measurements start 4-1
menu
INTRO
5-3
main menu 5-3
service mode 5-4
menu structure 5-3
metrological properties 7-2
mounting holes
M5, at the laser vibrometer
3-5
M6, at the laser vibrometer 3-5
mounting holes, inch thread at the laser
vibrometer
3-5
Mounting Platte VIB-A-P07, dimensions 7-8
O
opening, the housing 3-2
operating conditions
battery and battery charger
3-2
PDV 3-2
optic, laser vibrometer specifications 7-5
optical interference, basics B-1
optimal stand-off distance 4-4
optional accessories A-1
Over Temp., warning on the display 6-1
overrange indicator at the display 5-5
P
parameter, setting on the display 5-2
PDV
area of application
2-1
in battery operation 5-1
with power supply, switching on 5-1
phase difference, basics B-1
phase different, basics B-1
phase frequenzy response 4-3
pin configuration, mains plug 7-1
plug-in power supply, wide range input 3-2
power consumption
laser vibrometer, specifications
7-1
power supply, specifications 7-7
power supply
mains voltage, specifications power supply
7-7
specifications 7-7
power supply, laser vibrometer-specification 7-1
precautions, lithium ion batteries 1-6
prepare functional test 3-7
protection class
charger PDV-CH
7-9
PDV-100, technical specifications 7-2
power supply 7-7
Q
qualification of the user 1-1
R
radiant heat, operating conditions 3-2
rear view, control elements 3-4
relative humidity, technical specifications 7-2
return 3-1