Applications
VOLTstack units can be used to power any device that uses 100-120V AC power and does not exceed a sustained current
draw of 20A. The power rating of the device will determine how fast the State of Charge decreases.
Before operation, check the power rating of your device to ensure it is within the maximum power output of the VOLTstack.
The following devices are examples of low and medium load applications. See Technical Info section for more information
on common device loads.
TYPICAL APPLIANCE POWER CONSUMPTION
LOAD LEVEL DEVICE
TYPICAL CONSTANT POWER RATING
(W)
TYPICAL SURGE POWER RATING
(W)
Low
LED Light Bulb 4-10 N/A
Computer w/ Monitor 300 N/A
Medium
Drill 1/2” 600 900
Small Refrigerator 350 500
High
Circular Saw 1500 3000
Space Heater 750-1500 N/A
HELPFUL TIPS
Choose lower energy devices when possible to extend the remaining capacity of the
VOLTstack. For example, use LED lighting in place of incandescent lighting.
OPERATION
Version 1.0 September 2019
17
To Next Page
Loading...
