PORTABLE ELECTRIC VOLTstack 5k - High Temperature AC Output; High Temperature AC Charging; High Temperature Shut-Down; Cold Temperature AC Output

IMPORTANT
Operation below the minimum temperature specifications can cause permanent damage to your unit.
IMPORTANT
Operation above the maximum temperature specifications can cause permanent damage to your unit.
HELPFUL TIPS
For optimal performance of your VOLTstack, keep the ambient temperature
between 15-25
o
C at all times.
HELPFUL TIPS
In ambient temperatures below freezing, keep your VOLTstack operating a low
load to maintain a higher internal temperature.
High Temperature AC Output
In order to prevent internal damage, your VOLTstack will automatically turn o the AC output power if the
ambient temperature exceeds the rated value. In this case, moving the VOLTstack into a cooler environment is
recommended.
High Temperature AC Charging
In order to prevent internal damage, your VOLTstack will automatically de-rate the charging power as the
ambient temperature approaches the maximum rated value. If charging time is longer than expected under high
ambient temperatures, move the VOLTstack into a cooler environment.
High Temperature Shut-Down
Under extreme heat conditions above the rated values, your VOLTstack will automatically shut-down all
functions into O mode. This condition indicates the VOLTstack should be moved into a cooler environment as
soon as possible.
Cold Temperature AC Output
Run times will decrease when your VOLTstack is operating in ambient temperatures below freezing. Decreased
Run Times are aected by how close the ambient temperature is to the lower temperature limit, as well as by the
size of the load. The VOLTstack will generate its own heat when operating, try starting with a low load device to
increase the overall temperature of the unit before using a high load device.
Cold Temperature AC Charging
The VOLTstack should not be charged in temperatures below freezing.
Version 1.0 September 2019
25