HELPFUL TIPS
If the VOLTstack is fully charged, the Battery Monitor will NOT indicate charging.
WARNING
Do not connect solar panels or solar cables that have not been supplied
by Portable Electric to your VOLTstack.
WARNING
Follow the steps of connecting your SUNstack Solar Panel in the correct order.
WARNING
Exceeding the input voltage limits can cause permanent damage to your unit.
HELPFUL TIPS
The Battery Monitor will not indicate charging if the Net Power is negative.
Power On While Charging
Your VOLTstack has the ability to output AC power and charge at the same time. Charging can be done from an AC power
source or from a SUNstack Solar Kit, or both. See sections above on how to initiate Power ON, AC charging, or solar charging.
The VOLTstack has no transfer switch and can be operated as a true uninterrupted power supply.
The Battery Monitor will display the VOLTstack Power State. For a Discharging Power State (negative Net Power), the State of
Charge will decrease and the Battery Monitor will not indicate charging. For a Charging Power State (positive Net Power), the
State of Charge will show as charging on the Battery Monitor.
Total Charging Power (W) — Total Device Load (W) = Net Power
Version 1.0 September 2019
23
To Next Page
Loading...
