SOLAR CHARGING REQUIREMENTS
Input Current Max SOL1 20A
Input Current Max SOL2 20A
Input Voltage Range 33-150 VDC
HELPFUL TIPS
If the VOLTstack is fully charged, the Battery Monitor will NOT indicate charging.
HELPFUL TIPS
Most North American household circuits are limited to 15A output. For fast
charging the VOLTstack 5k, you’ll need two separate circuits.
HELPFUL TIPS
The Battery Monitor will not indicate charging if the Net Power is negative.
Solar Charging Operation
Your VOLTstack has the ability to be recharged from solar energy using SUNstack™ Solar Kits by Portable Electric. Follow the
steps below for safe and reliable solar charging. The solar charging input requirements are listed below.
Important Safety Information
The SUNstack Solar Kit is designed to provide safe and dependable VOLTstack charging when operated according to the
instructions. When using a SUNstack Solar Kit to charge a VOLTstack, it is important for all operators to understand warnings
and instructions in both this Owner’s Manual and the SUNstack Owner’s Manual. Operating the SUNstack and the VOLTstack
safely by observing safe operating procedures will help prevent accidental injury.
WARNING
Understand and follow all warnings and instructions in the SUNstack
Owner’s Manual before charging with a SUNstack Solar Kit.
Version 1.0 September 2019
21
To Next Page
Loading...
