EasyManua.ls Logo

PORTABLE ELECTRIC VOLTstack 5k - Net Power; Rear Plate; Run Time; State of Charge

PORTABLE ELECTRIC VOLTstack 5k
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Net Power
Net Power is the summation of the total charging power less the total device load power. Net Power can be
positive or negative.
Total Charging Power (W) — Total Device Load (W) = Net Power
Rear Plate
The Rear Plate is located at the rear of the VOLTstack. It contains the Master Battery On/O buttons, USB
Data Ports, Solar Charging Ports and Rear Vents. See the Components Identification and Location sections
for details.
Run Time
Run time is defined as the total amount of time your VOLTstack will output power until the unit needs to be
re-charged.
State of Charge
State of Charge is a numerical value (0%-100%) representing the energy remaining in a battery system. It
refers to the usable energy remaining as opposed to the maximum storage capacity of the battery.
SUNstack™ Solar Kit
SUNstack Solar Kits are a plug and play system developed by Portable Electric which include a SUNstack
Solar Panel, and SUNstack Carry Bag and a SUNstack Cable.
Surge
A temporary increase in the current or voltage of an electrical circuit. Surges often occur when power is
initially supplied to a device to switch on components such as motors or compressors.
VOLTstack Power Block
The Power Block is located inside of the VOLTstack and is the source of AC Power. See the Components
Identification and Location sections for details.
TERMINOLOGY CONT.
Version 1.0 September 2019
8

Table of Contents

Other manuals for PORTABLE ELECTRIC VOLTstack 5k

Related product manuals