Postek G2000 - Chapter 3: Operations and Settings; Operation Basics; Power Switch; The Front Panel

G2000/G3000/G6000 Industrial User’s Manual Chapter 3: Operations and Settings
25
Chapter 3: Operations and Settings
Operation Basics
Power Switch
The power switch is on the back panel of the printer. The symbols on the switch are defined as follows:
━ — ON
〇
— OFF
The Front Panel
The Front Panel of the G Series Industrial printer consists of:
- Three Indicator Lamps: MEDIA, READY and RIBBON
- T
hree multi function buttons: PAUSE/Self Test, FEED/Calibration and CANCEL/Reset.
- A 128 x 64 graphic dot matrix LCD display
The three lamps indicate the status of the printer (please refer to Chapter 4: Troubleshooting, for error indicators).
- Solid: Indicates the printer is in the normal state.
- Blinking: Indicates the printer is in the ‘PAUSE’ state.
-
Solid: Indicates the printer is in the normal state.
- Blinking simultaneously with READY: Running out of media.
- Solid: Indicates thermal transfer printing.
- Off: Direct thermal printing (no ribbon installed).
- Blinking simultaneously with READY: Running out of ribbon.
READY
MEDIA
RIBBON