Postek G2000 - Windows Driver and Label Software

G2000/G3000/G6000 Industrial User’s Manual Chapter 3: Operations and Settings
29
DHCP
Options: Enable, Disable
Default: Disable
Note: After set DHCP to Enable, you need to cycle the printer power as the screen prompts, the IP
will be renewed automatically.
Dump Mode
In dump mode, the printer will print out the data (printer commands) that are sent from PC or other
devices, instead of print out a label.
Options: Enable, Disable.
Default: Disable.
Detect Length
The Media feed length when perform Media Calibration.
Default 200, Unit mm.
Stand-Alone
Printing
Select the downloaded forms and print. Note: USB keyboard or scanner needed.
Clear Form Delete downloaded Form, one by one, or delete all at one time.
Clear Graphics
Delete the downloaded graphics, one by one, or delete all at one time.
Clear Setup Clear all the settings made in the LCD menu.
Windows Driver and Label Software
The G Series Industrial printer driver is packaged with the printer in the CD-ROM pack, and is compatible with the
following operating systems:
• Windows 7 • Windows NT • Windows 2000
•
Windows Vista
•
Windows ME
•
Windows 98
• Windows XP • Windows 2003 • Windows 95
•
Windows 2008
Drivers can also be downloaded from www.postek.com.cn and www.postektechnologies.com
Each G Series Industrial printer is also packaged with powerful barcode label editing software.
Note: Prior to uploading a new driver or software or installing an updated driver or software, remove any old version of
the driver or software that may be stored in your computer.