G2000/G3000/G6000 Industrial User’s Manual Appendix A: Interface Specifications
34
Poor Printing Quality
When experiencing poor print quality, check the following:
1. Adjust print darkness setting value in the driver under Printing Preferences/Options Tab.
2. Adjust print speed setting value in driver under Printing Preferences/Options Tab.
3. Clean the Printhead and the platen roller.
4. Poor quality printing may be caused from using a low quality ribbon. Change to higher quality ribbon.
5. Poor quality printing may be caused from using low quality media. Change to higher quality media.
Note: The darkness and print speed settings may also be adjusted in printer’s menu. Adjusting functions in the hardware
always overrides functions set in software.
Recovery
After the miscellaneous has been cleared, press the CANCEL button to clear the alarm or restart the printer to resume
the printing automatically.
Note: For errors not listed here, please contact an authorized POSTEK Service Provider for further assistance.
To Next Page
Loading...
