- 11 -
• Never open batteries, never solder or weld batteries. The risk of
explosions and injuries exists!
• Regularly check the condition of the batteries. Leaking batteries can
cause damage to the appliance.
• If you do not intend to use the appliance for an extended period,
remove the batteries.
• If the batteries have leaked, to avoid the risk of injury through chemical
burns put on a pair of protective gloves before removing the batteries.
• Clean the battery compartment and the battery contacts with a dry
cloth.
Commissioning
Unpacking
• Take the multimeter and all of its ancillaries out of the packaging.
• Remove all transportation fasteners and tapes/foils.
Items supplied
Before puting the appliance into use, check that all items are present and
free of visible damage.
• Digital Multimeter
• 2 Measuring leads (red and black) with measurement prods
• 2 Measuring leads (red and black) with measurement plugs
• 1 Temperature sensor with a yellow plug
• 1 Red adaptor for the temperature sensor
• 1 Battery, 9 V, Type 6F22
• these Operating Instructions
To Next Page
Loading...