45
K2 K3 | SERVICE MANUAL
INDEX
(Fig. 62)
Disconnected Faston connectors
(Fig. 63)
(Fig. 64)
(Fig. 65)
8. Removing the display (K-FRONT):
Before removing the display, discharge the power supply
capacitors bank as explained in chapter 3.
Remove the Faston connectors connecting the amplier
power switch as portrayed in (Fig. 62)
Now remove the front panel left and right ears as
portrayed in (Fig. 63, 64)
Remove the left and right protection plates as portrayed
in (Fig. 65)
To Next Page
Loading...
