PPI FLOREX User Manual

Lock/Unlock
This parameter allows the user to Lock / Unlock the adjustment of the parameter values. Refer, Section 3 : Pages &
Parameters for further details.
Supervisory Passcode
The access to this parameter is allowed only if the FLOREX is Unlocked. The numeric value set for this paramete under
supervisory level is a secret code that is commonly applicable for both Total Reset Command and Min./Max. Reset Command.
These commands will be effective only if the value entered for Passcode on Operator Parameter matches with the value set for
this parameter.
Default Setting
This parameter allows the user to set all the user settable parameters to their respective factory set default values. Refer,
Section 3 : Pages & Parameters for further details.
Factory Calibration Regain
This parameter allows the user to regain the factory calibration for Analog Input. Refer, Appendix-A : Calibration for further
details.
User Calibration
This parameter facilitates the user to carry out the calibration for Analog Input Group. Appendix-A : Calibration for further
details.
User Linearisation
This parameter facilitates the user to linearize the Analog Input curve as per the user derived values. Refer, Appendix-B :
linearisation for further details
Exit.
This parameter allows the user to exit the Utility parameter list and return to the MAIN Display Mode of the FLOREX.
User Manual
FLOREX
25

PPI FLOREX Specifications

General

Brand	PPI
Model	FLOREX
Category	Controller
Language	English