page 10
Unpacking the EFX
®
5.23
The EFX is carefully tested and inspected before shipment. Precor ships the unit in
several components, as listed below:
• base frame assembly • left and right handrails
• upright support • display console assembly
• base frame stabilizers (left and right) • bracket and side covers
• owner’s manual and hardware kit • lift cover
Optional Equipment
An additional POLAR
®
chest strap can be purchased by calling Retail Sales at
1-800-786-8404 or visiting the Precor web site at www.precor.com.
Carefully unpack the pieces of the unit and lay them on the floor near the
location where you plan to use the EFX.
Acquiring the Appropriate Tools
Obtain the following tools
before
assembling the EFX.
Wire cutter – for cutting wire ties
Phillips head screwdriver
Two 9/16" combination wrenches (open-end and box)
SAE Standard socket set with socket extension (for 9/16" bolts)
Rubber mallet
CAUTION: This unit weighs over 183
pounds (82 kilograms). To avoid injury and
to ensure the safety of the unit and
yourself, get adequate assistance before
unpacking your EFX. Break down the
container’s side walls before removing
anything from the box.
To Next Page
Loading...
Need help?
Power
Incline and Programs
Weight and Dimensions
