page 43
Maintaining the EFX
®
9
CAUTION: Never pour water or spray
liquids on the display console, handle-
bars, or EFX. Allow the EFX to dry
completely before using.
CAUTION: Turn OFF the EFX and
diconnect the power cord before perform-
ing any maintenance tasks.
The EFX requires little maintenance to keep it running smoothly and efficiently.
However, you are responsible for typical maintenance tasks such as, cleaning the unit
to keep it free from dust and dirt accumulation. If you fail to maintain the EFX as
described below, it could affect or void the Precor limited warranty.
Cleaning the Equipment
DANGER — TO REDUCE THE RISK OF ELECTRICAL SHOCK, ALWAYS UNPLUG THE UNIT FROM ITS POWER
SOURCE
BEFORE CLEANING IT OR PERFORMING ANY MAINTENANCE TASKS.
Most of the working mechanisms are protected inside the casing. However, for
efficient operation, the EFX relies on low friction. To keep the friction low, the EFX
rollers, rails, and internal mechanisms must be as clean as possible.
Everyday use a soft cloth, dampened (not dripping wet) in a diluted solution of
Simple Green
®
, to clean all exposed surfaces on the EFX.
To clean the ramp and roller wheels:
1. Check to make sure that the EFX is turned OFF.
2. Remove the locking pin. Refer to page 23.
3. Position one foot pedal at the top of the ramp (the other will automatically be
positioned at the bottom).
4. Clean the exposed ramp and roller wheel surfaces.
5. Switch the foot pedal positions to finish cleaning the ramp.
6. Gently, lift the roller wheel and rotate it while you wipe it. This helps removes any
dust or dirt which might affect the smooth operation of the unit.
Periodically, clean the groves on the foot pedals using a soft nylon scrub brush. Vacuum
the floor underneath the unit every week to prevent the accumulation of dust and dirt.
Servicing the EFX
Do not attempt to service the EFX
yourself except for the maintenance tasks described in
this manual. The unit does not contain any user-serviceable parts that require lubrication.
For information about product operation or service, call 1-800-347-4404.
Long Term Storage
When the EFX is not in use for any length of time, turn it OFF. Ensure that the power
cord is unplugged from the wall outlet and is positioned so that it will not become
damaged or interfere with other equipment or people.
To Next Page
Loading...
Need help?
Power
Incline and Programs
Weight and Dimensions
