page 28
This is what happens...,
You enter the Cool-down, Pause mode. Time stops accruing, but the display features
that you selected remain, so you can review your workout data. The Select keys and
Reset keys are active, but any pressure on the other keys is ignored. Note that this
mode has a ten-minute time limit.
The WORKOUT SUMMARY banner appears.
You exit Cool-down, Pause mode and the WORKOUT SUMMARY appears.
This is what happens...,
You return to the cool-down period from where you left off.
You exit the Cool-down period and the WORKOUT SUMMARY display appears.
The EFX exits Cool down, Pause mode, resets the displays, and returns to the
Precor banner.
This is what happens,...
The EFX returns to the Precor banner.
Note: If you exited a course prematurely by pressing Reset, the Workout Summary
display appears. You need to press Reset again to reset the displays and access the
Precor banner or wait for the ten minute time-out.
When you complete the five-minute cool down period, the WORKOUT SUMMARY
banner appears. Workout data except TIME, TOTAL STRIDES and CALORIES resets
to zero. (Note that the displays showing the accumulated workout time, strides, and
calories include warm-up and cool down periods.) You are given ten minutes to
review your workout statistics before the display automatically resets to the Precor
banner. You can also press Reset during this time, to return to the Precor banner.
you stop pedaling for six seconds.
In Cool down mode...,
In Cool down, Pause mode, you...,
complete it.
press Reset.
press Reset.
exceed the ten-minute time limit.
resume pedaling.
At the Workout Summary banner...,
you press Reset.
you exceed the ten-minute time limit.
To Next Page
Loading...
Need help?
Power
Incline and Programs
Weight and Dimensions
