Input Power and Machine Controls Troubleshooting
Errors in this section cover either input power (error 15 & 16) conditions, Console controls
(error 5 & 80-83), or processor/memory (error 9 & 11) conditions. These are errors that
although they are valid to the proper function of the machine, are not part of a specific treadmill
base system (lift system, drive system, deck & belt system, etc.).
Related Error Codes
l Input Power: 15,16,
l Machine Controls: 5, 80-85.
l Processor Memory; 9:11.
Refer to the Error Code Troubleshooting Guide for error code description and troubleshooting
information.
Procedure
Refer to the
Error Code Troubleshooting Guide
.
See Also
"System Troubleshooting Procedures" on page 99
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 116
7 Troubleshooting
System Troubleshooting Procedures
To Next Page
Loading...
Need help?
General
