EasyManuals Logo

Precor GEN06 Series User Manual

Precor GEN06 Series
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Cleaning Solutions
Wipe down equipment with recommended cleaning solution. Use dry cloth to remove residue
solution.
l General: 1 oz. mild soap (Simple Green) to 30 oz. water.
l Console and PVS
1
: a diluted solution of one part 91% Isopropyl alcohol to one part
water.
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.
Electrical Requirements
Dedicated Branch Circuit
It is required that the treadmill be connected to and operated on a dedicated 20 amp AC
2
branch circuit. A Dedicated Branch Circuit is defined as a circuit fed by a single circuit breaker
feeding a single load, with a single non-shared neutral providing a return line. A treadmill oper-
ating from a non-dedicated branch circuit or a circuit breaker of less than 20 amps capacity will
not have the necessary power to operate normally under higher load conditions.
120 Vac Systems
120 VAC
3
distribution systems utilize a single pole circuit breaker (power lead) and a neutral
lead connected to a common neutral (ground) bar. The AC. safety ground (green wire) is con-
nected to a separate ground bar in the distribution system.
If it is determined that any of the above electrical conditions are in question, please consult with
a qualified electrician to make appropriate circuit changes.
CAUTION: The treadmill requires a 20-amp individual branch circuit grounded per
NEC (National Electric Code) guidelines or local region electric code.
IMPORTANT: If the AC circuit feeding a treadmill is found to be a non-dedicated
branch circuit or a circuit equipped with a capacity of less than 20 amps, the AC circuit
must be corrected before any reliable Troubleshooting can be performed. More
importantly, a non-dedicated branch circuit may constitute a safety hazard to the tread-
mill operator.
1
Personal Viewing System display.
2
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
3
voltage in an alternating current circuit
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 7
2 General Information
Cleaning Solutions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precor GEN06 Series and is the answer not in the manual?

Precor GEN06 Series Specifications

General IconGeneral
BrandPrecor
ModelGEN06 Series
CategoryTreadmill
LanguageEnglish

Related product manuals