© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 31
factory. This is a hardware address that
uniquely identifies each node of a
network.
These addresses are set at the factory
and will not need to be changed in the
field.
Information Only
These addresses are set at the factory
and need be changed in the field.
Information Only .
Note: They
can be manually changed.
These addresses are set at the factory
and need be changed in the field.
Information Only
Type of equipment (AMT, RBK, UBK,
EFX, & TRM). Set at factory.
Information Only
Touch BACK to exit "About" (back to "Settings" menu).