© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 62
Channel Guide
The following procedure discusses how to set up the channel guide and how to configure audio and video
playback.
Note: The correct region must be set before you scan for available channels. To confirm the settings, touch
Region. A list of regions will be displayed. Confirm that the radio button next to the appropriate region for
your area is selected. If the highlighted region is incorrect, touch on the radio button next to appropriate
region. Touch OK and then touch BACK to go to the TV Settings menu.
To scan for available channels:
1 Touch Channel Guide from the TV Settings menu.
2 Select "Delete All" twice.
3 Touch "Channel Guide".
4 Touch Scan Channels.
The console will scan for available channels and when the scan is finished all available channels will be
displayed on the screen (this will take some time).
To name a channel:
There are 3 methods for naming the channels:
♦ Direct entry from the P80.
♦ Computer method for P80 consoles running software prior to version 3.2.
♦ Computer method for P80 consoles running software version 3.2 or later.
Direct entry from the P80 screen
1 Touch a channel from the channel guide list.
2 Touch Channel Name. A keyboard will be displayed.
3 Type in the desired channel name.
4 Touch OK.
5 Touch the next channel from the channel guide list and repeat steps 1 through 4 until all channels are
named.
To Next Page
Loading...
Need help?
General
