© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 55
P80 Display
The display settings allow you to configure Language, Measurement units, Standby Mode Delay, Time
Zone, and Closed Captioning.
1 From the "Settings" menu, press "System Settings", and then press "Display". The "Display" menu
will be displayed as below.
Figure 39: Settings to System Settings to Display Screens
2 To select a Display Setting, touch on an item in the Display menu, see the following Display Settings
Menu Table.
Section 7 - Display and
Entertainment Settings
To Next Page
Loading...
