© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 35
P80 System Settings Menu Table
The systems tests allow you to
check specific functions of the
equipment.
Touch
See Procedure,
(on page 37).
The connectivity screens allow
you to configure or provides
information about the
equipment’s network
connection.
Touch
See Procedure,
(on page 77).
The display settings allow you
to configure, Measurement
units, Standby Mode Delay,
Internet Browser Access,
Preva® Net Panel.
Touch
See Procedure,
(on page 55).
TV Settings help you set up
television channels for your
users.
Touch
See Procedure,
(on page 59).
The Workout Limit settings give
you control over how the
equipment is used. Use these
settings to create reasonable
limitations for equipment usage
including speed, incline,
resistance, and duration.
Touch
See Procedure,
(on page
42).
After Connectivity has been set
up the equipment can be
registered.
Touch.
See
Procedure,
Connectivity
and Registration
(see
"
Section 9 - Connectivity
and Registration
" on page
77)
Use this setting to save your
equipment settings to a USB
flash drive, or to import settings
from a USB flash drive.
Touch
See Procedure,
P80
Manage Settings
(Cloning)
(on page 69).
Touch BACK to exit "Equipment Usage" (back to "Settings" menu).