Precor P80 - Page 59

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 57
P80 Display Settings Menu Table
Settings
Settings
Options
Factory
Default
Configure/View/Test
Language
♦ German
♦ English
♦ Spanish
♦ French
♦ Italian
♦ Dutch
♦ Russian
♦ Japanese
English
1 Touch
Language
2 Touch on a radio button next to the
desired language, a dot will fill the radio
button next to the selection.
3 Touch
OK
to save the selection. Touch
CANCEL
to exit without saving the
selection.
Note: All menus and selection will be in the
language selected.
Measurement
Units
US Standard or
Metric
US Standard
1 Touch
Measurement Units
2 Touch on a radio button next to either US
Standard or Metric; a dot will fill the radio
button next to the selection.
3 Touch
OK
to save the selection. Touch
CANCEL
to exit without saving the
selection.
Standby Mode
Delay
♦ 5 Minutes
♦ 15 Minutes
♦ 30 Minutes
♦ 60 Minutes
15 minutes
1 Touch
Standby Mode Delay
.
2 Touch on a radio button next to the
desired delay time, a dot will then fill the
radio button.
3 Touch
OK
to save the selection. Touch
CANCEL
to exit without saving the
selection.
Time Zone
Note: This setting
will be displayed
only on software
version 3.0 or
earlier.
GMT- 12 through
GMT + 12
GMT – 00-
10
1 Touch
Time Zone
.
2 Touch on the radio button next to the
desired Time Zone, a dot will fill the radio
button.
3 Touch
OK
to save the selection. Touch
CANCEL
to exit without saving the
selection.