© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 84
Method 1 – The Event Log:
Reboot the P80. Once the P80 fully boots to the "Welcome" screen, go into the service access menus and
press "ABOUT", then press "EVENT LOG". Look for an entry that begins with "OMAP" and look for the
word "Hardware"
♦ Hardware1 = 256K memory (early P80s)
♦ Hardware2 = 512K memory
♦ Hardware3 = includes new dual power supply
Method 2 – Part Number Dash
On the back of the P80 armor behind the vent cover; look for the part number label.
♦ Part number with -101 or -601 only = 256K memory (early P80s)
♦ Part number with -102 or -602 = 512K memory
♦ Part number with -103 or -603 only = includes new dual power supply