4
1. ActivateButton. Tocompletelyremoveanychannel from
a
Cue Mix, simply deactivate the Cue Mix object for that
channel. In most instances, you will leave this enabled.
2.
Horizontal Level Fader. This is the channel’s Cue Mix volume control. By
default this level will be identical to the level set on the channel’s fader. Once
you move the Cue Mix level fader, the volume of that channel in the Cue Mix
will be independent of the main mix or any other cue mix in the session.
3.
PanControl.This sets the pan position for the channel in the Cue Mix
outputs. Like volume, panning is identical to the main mix by default.
4.
Lock to Channel button. By default, the Lock to Channel button is enabled, and
level and pan values are locked to the Channel level and pan controls for the
Main mix. This means that each Cue Mix will be identical to the Main mix in the
Console. Changing the level or panning in the Main mix will change the level or
panning in the Cue Mix. However, changing the level or panning in the Cue Mix
object will unlock both settings, allowing independent control of level and
panning for each channel in each Cue Mix. Thus, the level and panning for
channels in a Cue Mix can be completely different from the related level and
pan in the Main mix. At any time, you can lock the Cue Mix level and pan back
to the channel settings by clicking on the Lock to Channel button.
Activate Button.
要从 Cue Mix 中完全删除任何通道，只需停用该通道的Cue
Mix object。在大多数情况下，你会让它处于启用状态。
Horizontal Level Fader.
这是该通道的监听混音音量控制。默认情况下，这
个电平将与该通道音量推子上的设置电平相同。一旦你移动了
Cue Mix
音
量推子，该通道在监听混音中的音量，将独立于会话中的主混音或任何其
他监听混音。
PanControl.
这是为监听混音输出中的通道，设置
pan
的位置。像音量一样
默认情况下，
panning
与主混音是相同的。
Lock to Channel button. 默认情况下，”Lock to Channel” 按钮被启用，电平
和pan值, 被锁定到主混音的通道电平和pan控制中。这意味着，每个监听
混音将与控制台中的主混音相同。改变主混音的电平或摇摄，将改变监听
混音的电平或摇摄。然而，改变 Cue Mix object 中的电平或 pan将解锁这两
个设置，允许独立控制每个
Cue Mix
中每个通道的电平和
panning
。因此，
监听混音中的通道电平和panning，可以与主混音中的相关电平和panning
完全不同。在任何时候，你都可以通过点击”Lock to Channel button”按钮，
将监听混音的电平和pan锁定到通道设置上。
To Next Page
Loading...
