Prestige APSRS - Page 15

APSRS_RevC_9/17
15
Detailed Descripons: Setup Opons
Remote Start Control (Bank 3) (Cont.) See page 21 for Programming Instrucon.
Feature 20: Addional Unlock Pulses
Funcon: Set other outputs to pulse when the vehicle is unlocked with the remote control.
Seng Choices:
• Opon 1 - No addional unlock pulses.
• Opon 2 - Pulse Ignion, Accessory and Ground While Running wires upon Unlock.
• Opon 3 - Pulse Ignion, Accessory, Ground While Running, and Pulse Aer Shutdown wires upon unlock.
Feature 19: Factory Disarm Output Funcon (BLACK/BLUE)
Funcon: Set the funconality of the programmable output.
Seng Choices:
• Opon 1 - Sends a 1-second pulse before start and during Unlock.
• Opon 2 - Sends a 350ms pulse before start and during Unlock
• Opon 3 - Sends a 500ms pulse before start and during Unlock
• Opon 4 - Sends a 800ms pulse before start and during Unlock
• Opon 5 - Sends a pulse before start and during unlock based on seng of Bank 2, Feature 1.